MG,MGA,MGB,REDLINE Carburetor Kit 32/36 DGEV WEBER K 051, Carburetor Kit

  • Sale
  • $ 485.90
  • Regular price $ 665.00


K 051, Redline Wbber Carburetor Kit Electric Choke

 WITH CANNON INTAKE MANIFOLD AND LINKAGE

K051, Carburetor Kit DGEV 32/36 


FITS:

MGA,MGB 1500 CC,1600 CC ,1800 CC ENGINES

1975-on integral manifold, requires header


THIS CARBURETOR KIT IS NOT CARB APPROVED:AND NOT LEGAL FOR STREET USE

 IN

 STATES THAT REQUIRE CARB CERTIFICATION 

MGA 1955-1962

MGB GT 1963-1980

Before choosing your REDLINE  kit

 

1.      When choosing a kit or carburetor there’s a few things we would like you to know, please take a few minutes. Think about how you use your vehicle and what you want to accomplish. We have kits that range from a stock performance replacement for a worn out O.E. carb, to absolute race performance carburetors. There are many differing levels in between like the OUTLAW 38, the absolute in two-barrel bolt on performance. The performance gains you receive will come from the choices you make now.

Do you plan to add headers later on?  Will you be rebuilding the motor with bigger pistons and a cam? These modifications will affect your choice.

2.      Due to the newer fuels and the variation of fuels across the country we need to make sure that all customers know that if they have upgraded any of the system or modified the engine in any way they will need to do minor calibration adjustments. Usually these changes will be to the idle circuit, which is external and readily accessible. REDLINE has a Jet kit available for the PROGRESSIVE and OUTLAW SERIES carbs.

3.      We have done our best to pre-calibrate all kits; The base line is for a factory stock motor. On the PROLINE performance kits, due to a varying level of performance modifications (mild to wild) and because of the desire of many consumers and a history we have gathered, we under calibrate the highest performance range, to be street usable. Many people like the larger 45/48-mm carb's but use them in non-racing applications. We calibrate all kits for street use and drivability. This is not to guarantee that no additional calibration will be needed on these kits.

4.      Always check your factory fuel system. The REDLINE only requires 2.5 to 3 Lbs. of fuel pressure. Many newer systems use higher fuel pressures. You will need to add a fuel pressure regulator to these systems.

5.      When installing a new carburetor or fuel systems component always install a new fuel filter.

6.   The DCOE and IDF ultimate performance family of carburetor are not compatible with a vacuum advance distributor system. You will need to recurve your distributor or adjust the timing to compensate. You may also want to purchase a performance mechanical distributor.  

 

WEBER PARTS AND KITS AVALABLE FOR MOST MANUFACTURES